扭力扳手發出“卡塔”聲音的原理可以分為以下幾個步驟去解釋.
1,當所發出的"卡塔"是由本身內部的扭距釋放結構產生的,其結構分為壓力彈簧,扭距釋放關節,扭距頂桿三結構所組成. 2,在發出"卡塔"聲后是提示以達到你要求的扭距值了.3,*在扭距扳手設定所需扭距值（由彈簧套在頂桿向扭距釋放關節施壓）,鎖定扭距扳手開始擰緊螺栓,當螺栓達到扭距值后（當使用扭力于彈簧的壓力后）會產生瞬間脫節的應.在產生脫節應的瞬間發出關節敲擊扳手金屬外殼所發出的"卡塔"聲.由此來確認達到扭距值的提醒作用.（其實就象我們手臂關節成15度彎曲放在鐵管里瞬間申直后會碰到鋼管的原理樣）.以所說是常用的扭力扳手，除此之外還有電動扭力扳手、風動扭力扳手等。扭力扳手使用方法如下：1：逆時針轉動手柄處微調旋鈕2：轉動旋鈕設定刻度3：順時針轉動微調鈕鎖定扭矩4：使用時到設定扭矩會發出“嘀噠”聲，則停加力。www.regions.cc
Torque wrench to issue "Cartagena," the principle of sound can be divided into the following steps to explain.
1, when issued "Kata" is released by its own internal structure of torque, and its structure is divided into pressure spring, the release of the joint torque, torque ejector structure composed of three 2, the issue of "Kata" after the prompt in order to achieve the sound you required torque value of .3, the first in the torque wrench to set the desired torque value （set by the spring on the plunger to release the joint torque pressure）, locking torque wrench to tighten the bolts started, when the bolt to torque value （when using the torque is greater than the pressure of the spring after） will produce an instant effect of touch in the issue arising out of touch the moment the joint effect of metal percussion wrench "issued by Kata "sound. thus to achieve the torque values ??confirm the reminder. （in fact, as we arm bent 15 degrees on the joints of iron pipes in the instant application straight pipe will encounter the same principle.） mentioned above is the most common torque wrench, in addition to electric torque wrenches, pneumatic torque wrenches and so on. Torque wrench as follows: 1: Turn the handle fine-tuning knob 2: Turn the knob to set the scale 3: fine-tuning knob clockwise rotation locking torque 4: used to set the torque will be issued a "tick" sound, then the stop on the afterburner.
襄陽德而尼自動化設備有限公司銷售各種品牌的扭力扳手，洽談。（Xiangyang German and Nepalese Automation Equipment Co., Ltd. Sales of all brands of torque wrenches, please call to discuss.）
您的位置：
QQ交談
